PED 2014/68 EU

Round Bars 10–120 mm

, , , , ,

Conforms with: , , , , , , , , , , , , , , ,

Material properties: Tensile Strength 900–1050 MPa, Yield Strength 750– MPa, Working temperature 0–580 °C

Creep resisting steel, hardened and tempered. Usual upper temperature limit for continuous operating 580°C, Using: Bolts, Nuts, Turbine Blades, Steam Valve and Turbine components SIMILAR BUT NOT AN EQUIVALENT TO AISI 422 SS

Round Bars 10–120 mm

,

, , , , ,

,

Conforms with: , ,

Material properties: Tensile Strength 600–750 MPa, Yield Strength 440– MPa, Working temperature 60– °C

Equivalent or similar: Similar chemical composition with 42CrMo4+QT and SA 193-B7/SA320-L7 but with lowest Carbon content and lowest Tensile Strenght. AISI 4130, SS2225, GOST 20KHM, 30KHM, 30KHMA, G25CrMo4, 1.7258 / 24CrMo5, 1.7219 / 26CrMo4 Mechanical conform with DIN EN 898-1 grade 5.6 and DIN EN 898-2 grade 5.0

Usualy used for high and low temperutare bolting. Charpy RT min 60J

Round Bars 14–350 mm

, , , , , , , ,

,

Conforms with: ,

Material properties: Tensile Strength – MPa, Yield Strength – MPa, Working temperature – °C

Round Bars 20–200 mm

,

, , ,

,

Conforms with: , , , , , , , , , , , , ,

Material properties: Tensile Strength 700–850 MPa, Yield Strength 550–1 MPa, Working temperature 0–550 °C

Equivalent or similar: CSN 15320.5, CSN 15320.6, 21HMF, 20CDV5-07, 25KH1M1F, MCrMoV, ST460TS, Cr-Mo-V, 20CDV5-07 - 20 CDV 5-07 - 20CDV5.07

Chrome Molybdenum Vanadium steel 21CrMoV5-7 is used for steam and gas turbine components and also for high temperature industrial boilers, valves and oil & gas applications. Bolts, studbolts, nuts, washers, bonet bolts parts of the turbine, pumps, valves etc.

Round Bars 20–100 mm

, ,

Conforms with:

Material properties: Tensile Strength 1040–1200 MPa, Yield Strength 940– MPa, Working temperature – °C

Equivalent or similar: AISI 4340, SAE 4340, G43400, SEW 310, SEW 550,30NCD8, ASTM A 29 4340, SNCM431, BS 823M30, 3KH3M3F DIN EN 898-1 class 10.9 and DIN EN 898-2 class 10.0

Quenched and tempered steel with high temperability and toughness thanks to the high chromium content. It can be quenched and tempered at high resistance values and offers hardness consistency and uniformity. Generally used for pinions and shafts. Has average machinability on tool machines. Can be nitrided at the quenched and tempered state to increase resistance to wear and the fatigue limit. Uses: Highly stressed components with large cross sections for aircraft, automotive and mechanical engineering, such as propeller shafts, connecting rods, gear shafts, crankshafts, landing gear components. Heavy forgings, such as rotors, shafts and discs. For economic performance under severe dynamic stresses, parts must be designed for optimum strength.

Round Bars 20–100 mm

,

Conforms with:

Material properties: Tensile Strength 1040–1200 MPa, Yield Strength 940– MPa, Working temperature – °C

Equivalent or similar: ASTM 4340, SAE 4340, SAE 4337, SEW 550, SNCM447, 35NCD6, BS 817M40, 35CrNiMo6, 35NiCrMo6KB, SS2541, PN 34HNM, CSN 16342, CSN 16343, CSN 16444, GOST 36KH2N2MFA, 38KH2N2MA, 40KHN2MA DIN EN 898-1 class 10.9/12.9 and DIN EN 898-2 class 10.0/12.0

This is the steel most commonly used in northern Europe when the addition of nickel is required by the severe use conditions. It has an elevated temperability thanks to the presence of significant levels of nickel and chromium: it is even suitable for the construction of large pieces that, at the quenched and tempered state, have well transformed structures down to the core.

Round Bars 10.72–120 mm

,

, , ,

,

Conforms with:

Material properties: Tensile Strength 860–1060 MPa, Yield Strength 730– MPa, Working temperature -100–450 °C

Equivalent or similar: SA 193-B7, SA320-L7, AISI 4140, SCM440H, 42CD4, 708M40, SS2244, GOST 35KHM, 38KHM, DIN EN 898-1 class 8.8 and DIN EN 898-2 class 8.0

Round Bars 10.72–120 mm

,

, , ,

,

Conforms with:

Material properties: Tensile Strength 860– MPa, Yield Strength 720– MPa, Working temperature –450 °C

Equivalent or similar: AISI 4140, SA320-L7, 1.7225 / 42CrMo4+QT, 42CD4

USA fasteners grade ASTM / ASME with Europe certifications. PED and ADW. Charpy min. 27J

Round Bars 14.52–210 mm

,

, , , ,

Conforms with: , , , , ,

Material properties: Tensile Strength 850–1000 MPa, Yield Strength 700– MPa, Working temperature –550 °C

Equivalent or similar: K14072, SA193-B16, SA194 Gr.16, Alloy steel 661, 661B (UK), BS 1506 671-850, 42CDV4, Durehete 950

DUREHETE 950 Uses Power generation (turbine fastener, boiler support rods) Process plant fasteners

Round Bars 4–850 mm

, ,

Conforms with:

Material properties: Tensile Strength 440–590 MPa, Yield Strength 275– MPa, Working temperature 0–530 °C

Equivalent or similar: CSN 15020, A204Gr.A, A204Gr.B, SS2912, 15D3,

EN 10273 / EN 10222-2 / EN 10060 / DIN 7526 Bl.6 EN 10028-2 / EN 10024, 10034, 10279 Uses: These steel grades are characterised by a good weldability. They are used above all for manufacturing boilers, pressure vessels and pipes transporting hot liquids. The user of these steel grades must make sure that his calculation, design and processing methods are appropriate for the material. The grades of this series offer good cold and hot-forming properties.